Slim Motorsports' News

E31 Cylinder Head. Malvern Racing Prepared and refreshed (No use since refresh). Adjustable timing gear, titanium valves, port matched. $5500 to duplicate, yours for $3000.

The following is a list of parts & labor to bring this head up to a useable set up for SCCA Regional Racing.

Labor : Disassemble & Inspect / Hot tank - glassbead / Pressure test / Mill to true head gasket surface ( .001 to .002 thau) / R&R guides ream hone to size / Machine spring seats / Index & install new seats for 1.730 intake & 1.380 exhaust valves / port valve bowels blend for bigger valves and contour radii / Competition valve job / Backcut valves / Set valve heights / CC chambers equalize / Clean & assemble & set spring heights & pressures / Set up rocker geometry Total = $2,100.00. This head can be ported completely intakes & exhaust & chambers & intake manifold for an additional $1850.00 labor.

Parts : 44mm comp. intake valves / 35mm comp. exhaust valves / 12 valve seats / 12 bronze valve guides / 12 Vitron oil seals / 12 1.340 OD comp. valve springs / 12 steel shouldered spring seats / 12 steel comp. retainers ( Titanium retainers are also available ) / New valve keepers / 12 buttons / 12 new rockers / new race cam solid core / new OEM cam oil spray bar / NISMO Comp. intake manifold gasket Total = $1,425.00 with steel retainers / $1,521.00 with Titanium retainers.


08/07/05		SOLD - 1979 Nissan 280ZX ¾ tube racecar. New engine, new tires, new Simpson Platinum seatbelts. Quarter Master Twin disc clutch, Independent rear, Panasport wheels, dual MSD; $6500 or best offer. Contact Chris at chris@slimmotorsports.com

08/07/05		E31 Cylinder Head. Malvern Racing Prepared and refreshed (No use since refresh). Adjustable timing gear, titanium valves, port matched. $5500 to duplicate, yours for $3000. The following is a list of parts & labor to bring this head up to a useable set up for SCCA Regional Racing. Labor : Disassemble & Inspect / Hot tank - glassbead / Pressure test / Mill to true head gasket surface ( .001 to .002 thau) / R&R guides ream hone to size / Machine spring seats / Index & install new seats for 1.730 intake & 1.380 exhaust valves / port valve bowels blend for bigger valves and contour radii / Competition valve job / Backcut valves / Set valve heights / CC chambers equalize / Clean & assemble & set spring heights & pressures / Set up rocker geometry Total = $2,100.00. This head can be ported completely intakes & exhaust & chambers & intake manifold for an additional $1850.00 labor. Parts : 44mm comp. intake valves / 35mm comp. exhaust valves / 12 valve seats / 12 bronze valve guides / 12 Vitron oil seals / 12 1.340 OD comp. valve springs / 12 steel shouldered spring seats / 12 steel comp. retainers ( Titanium retainers are also available ) / New valve keepers / 12 buttons / 12 new rockers / new race cam solid core / new OEM cam oil spray bar / NISMO Comp. intake manifold gasket Total = $1,425.00 with steel retainers / $1,521.00 with Titanium retainers. Contact Chris at chris@slimmotorsports.com

02/09/04		We would like to announce our newest crew member, Beaux Ashton, weighing in at 7 lbs 5 ozs and 19 1/4" long!

05/25/03		We won two races at the Grattan Double Regional.Check out the pictures.

05/21/03		We spent the afternoon with students from the Thornton Creek Kid's Klub.Check out the pictures.

05/10/03		We helped Dick Scott Nissan open a new dealership in Canton along with the Detroit Z Car Club and many other Z Car Clubs. Check out the pictures.

04/06/03		The car is almost completely back together and the new engine is running.

11/10/01		Chris received his trophy for winning the Central Division Regional Championship for GT-2.Check out the pictures.

09/01/01		Grattan was a nightmare. We had engine trouble that has sidelined the car. We will begin rebuilding for next year.Check out the pictures.

08/01/01		MidOhio was great. We're still working on tuning the new engine, but the track time was really beneficial. We were a single car class again, so we got two 1st place trophies and two flags.

07/16/01		GingerMan was a learning experience. The engine is missing quite a bit. We lost an oil pan plug during Saturday's race, but we finished on Sunday. We were a single car class, so we got our 1st place trophy.

07/08/01		The new motor is in and it sounds awesome!!! Look for us at GingerMan next weekend!!

05/12/01		The schedule is changed to begin in June. We are having an engine built as well as many modifications to the car that will not be complete in time to race in May. We'll be ready in June with new paint and new decals!

03/10/01		Our new trailer is finished and delivered. The graphics are not on it yet, but here are the pictures!

01/24/01		Slim Motorsports partners with F1 Marketing Group (Speedgear) to offer collectible items directly from our site. Just click on their link at the bottom of every page or on our links page!

01/18/01		Slim Motorsports partners with Lands End to bring you the same high quality clothing that you'll find the team wearing. Lands End is the official clothier and embroider of Slim Motorsports. Just click on their link at the bottom of every page or on our links page to see what they have to offer!

12/05/00		Chris completed the Panoz Three Day Road Racing School! Check out the photos!

06/30/00		We bought the car and Slim Motorsports was started!


Best viewed by Microsoft Internet Explorer Copyright©2000 Slim Motorsports. All Rights Reserved. Webmaster: webmaster@slimmotorsports.com Last Updated 04/03/05